This Portwest FR hooded sweatshirt moves with you and keeps you warm and comfortable, with ribbed hem and cuffs. It features a self lined hood with adjustable drawstring closure. The handy pouch pockets at the front of the garment provide hand warming and ample storage.
This industry leading flame resistant range provides multi-standard protection for hazardous environments. These state of the art products are the result of years of experience combined with advanced technology and market research. Commitment to the health, safety and comfort of the wearer can be seen in the wide range of products suitable for all climates and end uses.
Features
High cotton content for superior comfort
Flame resistant ribbed cuff for added safety
Ribbed hem for a comfortable fit
Generous fit for wearer comfort
Grown on hood is stylish and practical
Kangaroo pocket for ample storage
Hood for added protection against the elements
40+ UPF rated fabric to block 98% of UV rays
Available in sizes up to 6XL
FR StandardsASTM F1959/F1959M-14e1 (ATPV 22 CAL/CM2 (HAF = 90%))ASTM F1506NFPA® 2112NFPA® 70E
Refinery Work Wear is excited to offer these premium Navy Stretch Comfort Hi-Vis Cargos. Every consideration has been put behind the design of these pants in terms of comfort, safety, movement, and function. These cargos are much softer and flexible than most standard style cargos. They also offer reinforcement in common-wear areas, hidden elastic waist, and a zippered pocket.
THIS IS A CLEARANCE ITEM
**The elastic in the waist band tend to make the pants run a bit tight and therefore we recommend going ONE size up.
Features:
Color: Classic Dark Navy
Flat front design
Reinforced knee panel
Comfort elastic expandable waist
Two angled side pockets
Coin pocket
Shaped front hem
Back pockets
6 standard belt loops and 1 wide back belt loop
Reinforced groin and seat
Hi-Vis striping below the knee
ONE size up from normal waist size is recommended**
Safety:
3M Scotchlite 2" reflective Hi-Vis Striping below knee
HRC2/CAT 2
ATPV 9.0 cal/cm2 (electric arc flash rating)
ASTM F1506 / NFPA 70E
CGSB 155.20 / NFPA 2112
• SET-IN SLEEVE SHIRT
• CENTER FRONT BUTTON UP CLOSURE• TWO LARGE CHEST POCKETS• PEN SLIT ON LEFT CHEST POCKET• TWO PIECE STAND COLLAR• ELBOW PATCHES DOUBLE LAYER• BUTTON-UP CUFF WITH SLEEVE PLACKET• ACTION BACK• -Triple Trim 3M Canada 2” F.R. as per CSA Z96• RADIO LOOPS
THIS FR WORKWEAR GARMENT MEETS THEREQUIREMENTS OF CAN/CGSB-155.20.MEETS REQUIREMENTSOF PERFORMANCESPECIFICATION ASTM-F1506.NFPA 70EHRC2
We recommend sizing up by one size as this manufacturer runs smaller than usual.
**THIS IS A CLEARANCE ITEM AND MAY HAVE RESTRICTIONS FOR RETURNS. Please see our Shipping and Returns page for more information.
88% COTTON 12% HIGH TENACITY NYLON FLAME RESISTANT INSULATED PARKA W/ LAMINATED PU F.R. MEMBRANE
long life VAT dyed fabric
2 way Brass zipper w/interior and exterior storm flaps and concealed snaps closure
Mandarin collar w/concealed female snap configuration under collar for hood addition (option)
Hood included if available
2 torso pockets, closed with pocket flaps and concealed snap
2 mic clips at upper torso
2 lower side pockets, upper and side access w/pocket flaps, closed w/concealed snaps, pockets lined with F.R. fleece knit
2 mic clips at upper torso and Velcro patch for crest quick installation
action back, elasticized waist with interior adjustment mechanism
Nomex® storm knit wrists
sewn with Nomex®/Aramid threads
reinforced stress points
CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''
Meets :
- CGSB 155.20 Standard Hydro Carbon Flash Fire
- NFPA70E / CSA Z 462-15, Arc Flash
- ASTM F 1506-08, Flame resistance
- OSHA 1910.269, Flame resistance and Electrical Arc (Ontario)
ATPV 40.6 CAT4
These Premium AR/FR un-insulated bib overalls perform with functionality in mind. The most common areas of wear in most garments are wear in the seat, groin or knees regardless of the industrial setting. All of these areas have been reinforced and stitched in a way that allows for extra movement and durability. The snaps make changing in/out of these bibs quick. They're light-weight and perfect for summer yet meet every safety standard using only top quality materials.
Features:
• FLAT FRONT LOOK• REINFORCED KNEE PANELS, SEAT AND CROTCH• FRONT CLOSURE WITH SNAP• TWO ANGLED SIDE POCKETS WITH SIDE ACCESS PANEL WITH SNAP• RHS COIN POCKET• LHS SNAP CLOSURE CARGO POCKET AND BACK BELLOW• 2" YELLOW/SILVER/ YELLOW TRIPLE BAND REFLECTIVE DOWN THE CHEST, ACROSS THE WAIST AND LEGS, AND "X" ON BACK• 100% FR FABRIC, FR TRIMS AND THREADS
Safety:
CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''
Sewn with Nomex® /Aramid threads
CGSB 155.20
ASTM F1506
ATPV 9.0 Cal/cm2 CAT 2
**For Sizing: These fit true to waist measurements. Ex: 36R Bibs are for a 36" Waist. Please consider sizing up if bibs are going over your regular clothes
***THIS ITEM IS ON CLEARANCE AND IS NOT RETURNABLE.
UL Certified Flame Resistant Fabrics and Garments.
FR Fabric: 88% Cotton & 12% Nylon. CAT 2 (HRC 2).
CSA Z96 Class 3 Bright Orange, Level 2
Carrying all sizes in stock from 32-80 R and T. Fast Delivery
Life time flame resistant quality.
Pre-shrunk FR fabric engineered and manufactured in house.
Patented Supersoft® technology, for comfort and breathability.
Extra straps on front pocket for H2S monitors.
2" 3M Scotchlite Reflective Silver Stripes.
YKK two-way heavy-duty premium FR zippers.
Customization & Embroidery available at very low costs.
• SET-IN SLEEVE SHIRT• CENTER FRONT BUTTON UP CLOSURE• TWO LARGE CHEST POCKETS• PEN SLIT ON LEFT CHEST POCKET• TWO PIECE STAND COLLAR• ELBOW PATCHES DOUBLE LAYER• BUTTON-UP CUFF WITH SLEEVE PLACKET• ACTION BACK• -Triple Trim 3M Canada 2” F.R. as per CSA Z96• RADIO LOOPS
THIS FR WORKWEAR GARMENT MEETS THEREQUIREMENTS OF CAN/CGSB-155.20.MEETS REQUIREMENTSOF PERFORMANCESPECIFICATION ASTM-F1506.
We recommend sizing up by one size as this manufacturer runs smaller than usual.
**THIS IS A CLEARANCE ITEM AND MAY HAVE RESTRICTIONS FOR RETURNS. Please see our Shipping and Returns page for more information.
Made in Canada, these Premium AR/FR insulated bib overalls will keep you warm, perform with full functionality in mind and are made in Canada with only top quality material.
Features:
-YKK’s Vis-lon zippers front closure-Two torso pockets with flap snap closure-21’’ YKK’s Vis-lon zipper at leg with storm flap-Tab closures at ankles with snap-Two slanted front pocket with snap closure-Two large tool pockets with division in the middle-3M Canada F.R. 2” triple trim reectives at bottom legs,-Lock stitch sewing technology,-Nomex sewing thread-Bartacks at all stress points
Safety:
CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''
Sewn with Nomex® /Aramid threads
CGSB 155.20
ASTM F1506
ATPV 40.6 Cal/cm2 CAT 4
Meets CSA Z462 Arc Flash Protection
Sizing:
Please measure around the widest point of your body in inches and remember to round up to accommodate for clothing that you'll be wearing underneath!
30"-32" - XS
34"-36" - SM
38"-40" - M
42"-44" - L
46"-48" - XL
50"-52" - 2XL
54"-56" - 3XL
These Premium AR/FR un-insulated bib overalls perform with functionality in mind. The most common areas of wear in most garments are wear in the seat, groin or knees regardless of the industrial setting. All of these areas have been reinforced and stitched in a way that allows for extra movement and durability. The snaps make changing in/out of these bibs quick. They're light-weight and perfect for summer yet meet every safety standard using only top quality materials.
Features:
• FLAT FRONT LOOK• REINFORCED KNEE PANELS, SEAT AND CROTCH• FRONT CLOSURE WITH SNAP• TWO ANGLED SIDE POCKETS WITH SIDE ACCESS PANEL WITH SNAP• RHS COIN POCKET• LHS SNAP CLOSURE CARGO POCKET AND BACK BELLOW• 2" YELLOW/SILVER/ YELLOW TRIPLE BAND REFLECTIVE DOWN THE CHEST, ACROSS THE WAIST AND LEGS, AND "X" ON BACK• 100% FR FABRIC, FR TRIMS AND THREADS
Safety:
CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''
Sewn with Nomex® /Aramid threads
CGSB 155.20
ASTM F1506
ATPV 9.0 Cal/cm2 CAT 2
**For Sizing: These fit true to waist measurements. Ex: 36R Bibs are for a 36" Waist. Please consider sizing up if bibs are going over your regular clothes
***THIS ITEM IS ON CLEARANCE AND IS NOT RETURNABLE.
Made in Canada, these Premium AR/FR insulated bib overalls will keep you warm, perform with full functionality in mind and are made in Canada with only top quality material.
Features:
-YKK’s Vis-lon zippers front closure-Two torso pockets with flap snap closure-YKK’s Vis-lon zipper at leg with storm flap-Tab closures at ankles with snap-Two slanted front pocket with snap closure-Two large tool pockets with division in the middle-3M Canada F.R. 2” triple trim reflective at bottom legs,-Lock stitch sewing technology,-Nomex sewing thread-Bar tacks at all stress points
Safety:
CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''
Sewn with Nomex® /Aramid threads
CGSB 155.20
ASTM F1506
ATPV 40.6 Cal/cm2 CAT 4
Meets CSA Z462 Arc Flash Protection
Sizing:
Please measure around the widest point of your body in inches and remember to round up to accommodate for clothing that you'll be wearing underneath!
30"-32" - XS
34"-36" - SM
38"-40" - M
42"-44" - L
46"-48" - XL
50"-52" - 2XL
54"-56" - 3XL
NOTE THIS ITEM IS A CLEARANCE ITEM AND CANNOT BE RETURNED
Black FR 10oz. Flame Shield Cotton
made in India
Certified NFPA 2112 and NFPA 70E
17 cal/cm²
ARC 2
Front Hand Warmer Pocket
Rib Knit waist and cuffs
Rasco FR Black Pullover Flame Resistant Hooded Sweatshirt - BHS2260
Rasco FR has devoted their time in designing this Rasco FR Black Pullover Flame Resistant Hooded Sweatshirt, utilizing top quality products that not only protect you in the harsh work places we work in but come packed with style and comfort. This Rasco FR pullover hooded sweatshirt is made witha preshrunk 10oz 100% cotton knit that is not only NFPA 2112 and ASTM F1506 certified by UL, it is also NFPA 70E Compliant, and has a HRC 2 rating. This pullover hoodie is is the same as the black hooded sweat shirt from Rasco FR's originl design the only differance is the lack of the zipper and the full front pocket
Rasco FR Pullover Black Flame Resistant Hooded Sweatshirt Information:
Color: BlackBrand: Rasco FRHRC: 2Protection Level: ATPV 17 Cal/cm2NFPA 2112 and ASTM F1506 Certified by ULNFPA 70E compliant
Featuring:100% Pre washed Black 10oz FR KnitPullover DesignOne front hand warming pocketAttached Hood with FR draw-cord closure
Rasco FR Hi Vis Insulated Bib Overall FR6706OH
Exterior 8.5 oz Westex All Out®
88% Cotton / 12% High Tenacity Nylon with Wind & Water Resistance
Insulation: 7 oz Modarylic
Lining: 7.5 oz FR Flameshield, 100% Cotton Twill
Arc rating (APTV): 40 cal/cm2 CAT 4 (HRC 4)
Heavy cotton elastic shoulder straps
Two front chest pockets
Two back pockets
Two-way brass FR taped front zipper
Leg zippers
4" yellow/silver/yellow reflective FR industrial wash sew-on trim
Certifications:
CSA Z96-15
NFPA 2112 - Certified by UL
CSA Z462
CGSB 155.20
NFPA 70E
Rasco FR Gray Heavyweight Work Shirt 10 oz. –
The Rasco FR Gray GFR1014 10 ounce 100% twill cotton long-sleeved work shirt is built for comfort and for tough jobs. Certified NFPA 70E, it is also NFPA 2112 and ASTM F1506 Certified. The material is proven to self—extinguish and offer consistent flame resistant protection even after substantial number of dry cleaning and washes. With easy care instructions for industrial and home wash, the Rasco FR Heavyweight Work Shirt is the ideal protective garment for industrial personnel.
FR Features and care of the GFR1014 Rasco FR Gray Heavy Weight Work Shirt
Brand: Rasco FR
Laundry Care: Home Wash and industrial Wash
Color Orientation: Gray Twill
100% Pre Washed FR 10oz Gray FR Twill
2 Chest Pockets With Flap & Snap Closure
3 snap cuffs with added sleeve vent
Certified NFPA 70E and NFPA 2112 By UL
ASTM F1506 Certified by UL
HRC 2 Arc-rated FR garment
ATPV 14 CAL/CM² FR Twill
Sku: GFR1014
Save Up To 80% Off FR Products
Find unbeatable deals on FR clothing. These deals won't last long!