Products

88% COTTON 12% HIGH TENACITY NYLON FLAME RESISTANT INSULATED PARKA W/ LAMINATED PU F.R. MEMBRANE long life VAT dyed fabric 2 way Brass zipper w/interior and exterior storm flaps and concealed snaps closure Mandarin collar w/concealed female snap configuration under collar for hood addition (option) Hood included if available 2 torso pockets, closed with pocket flaps and concealed snap 2 mic clips at upper torso 2 lower side pockets, upper and side access w/pocket flaps, closed w/concealed snaps, pockets lined with F.R. fleece knit 2 mic clips at upper torso and Velcro patch for crest quick installation action back, elasticized waist with interior adjustment mechanism Nomex® storm knit wrists sewn with Nomex®/Aramid threads reinforced stress points CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Meets : - CGSB 155.20 Standard  Hydro Carbon Flash Fire - NFPA70E / CSA Z 462-15, Arc Flash - ASTM F 1506-08, Flame resistance - OSHA 1910.269, Flame resistance and Electrical Arc (Ontario)   ATPV 40.6 CAT4

These Premium AR/FR un-insulated bib overalls perform with functionality in mind. The most common areas of wear in most garments are wear in the seat, groin or knees regardless of the industrial setting. All of these areas have been reinforced and stitched in a way that allows for extra movement and durability. The snaps make changing in/out of these bibs quick. They're light-weight and perfect for summer yet meet every safety standard using only top quality materials. Features: • FLAT FRONT LOOK• REINFORCED KNEE PANELS, SEAT AND CROTCH• FRONT CLOSURE WITH SNAP• TWO ANGLED SIDE POCKETS WITH SIDE ACCESS PANEL WITH SNAP• RHS COIN POCKET• LHS SNAP CLOSURE CARGO POCKET AND BACK BELLOW• 2" YELLOW/SILVER/ YELLOW TRIPLE BAND REFLECTIVE DOWN THE CHEST, ACROSS THE WAIST AND LEGS, AND "X" ON BACK• 100% FR FABRIC, FR TRIMS AND THREADS Safety: CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Sewn with Nomex® /Aramid threads CGSB 155.20 ASTM F1506 ATPV 9.0 Cal/cm2 CAT 2 **For Sizing: These fit true to waist measurements. Ex: 36R Bibs are for a 36" Waist. Please consider sizing up if bibs are going over your regular clothes ***THIS ITEM IS ON CLEARANCE AND IS NOT RETURNABLE.

UL Certified Flame Resistant Fabrics and Garments. FR Fabric: 88% Cotton & 12% Nylon. CAT 2 (HRC 2). CSA Z96 Class 3 Bright Orange, Level 2 Carrying all sizes in stock from 32-80 R and T. Fast Delivery Life time flame resistant quality. Pre-shrunk FR fabric engineered and manufactured in house. Patented Supersoft® technology, for comfort and breathability. Extra straps on front pocket for H2S monitors. 2" 3M Scotchlite Reflective Silver Stripes. YKK two-way heavy-duty premium FR zippers. Customization & Embroidery available at very low costs.

• SET-IN SLEEVE SHIRT• CENTER FRONT BUTTON UP CLOSURE• TWO LARGE CHEST POCKETS• PEN SLIT ON LEFT CHEST POCKET• TWO PIECE STAND COLLAR• ELBOW PATCHES DOUBLE LAYER• BUTTON-UP CUFF WITH SLEEVE PLACKET• ACTION BACK• -Triple Trim 3M Canada 2” F.R. as per CSA Z96• RADIO LOOPS THIS FR WORKWEAR GARMENT MEETS THEREQUIREMENTS OF CAN/CGSB-155.20.MEETS REQUIREMENTSOF PERFORMANCESPECIFICATION ASTM-F1506. We recommend sizing up by one size as this manufacturer runs smaller than usual.  **THIS IS A CLEARANCE ITEM AND MAY HAVE RESTRICTIONS FOR RETURNS. Please see our Shipping and Returns page for more information.

Made in Canada, these Premium AR/FR insulated bib overalls will keep you warm, perform with full functionality in mind and are made in Canada with only top quality material.  Features: -YKK’s Vis-lon zippers front closure-Two torso pockets with flap snap closure-21’’ YKK’s Vis-lon zipper at leg with storm flap-Tab closures at ankles with snap-Two slanted front pocket with snap closure-Two large tool pockets with division in the middle-3M Canada F.R. 2” triple trim reectives at bottom legs,-Lock stitch sewing technology,-Nomex sewing thread-Bartacks at all stress points Safety: CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Sewn with Nomex® /Aramid threads CGSB 155.20 ASTM F1506 ATPV 40.6 Cal/cm2 CAT 4 Meets CSA Z462 Arc Flash Protection Sizing: Please measure around the widest point of your body in inches and remember to round up to accommodate for clothing that you'll be wearing underneath! 30"-32" - XS 34"-36" - SM 38"-40" - M 42"-44" - L 46"-48" - XL 50"-52" - 2XL 54"-56" - 3XL

88% COTTON 12% HIGH TENACITY NYLON FLAME RESISTANT INSULATED PARKA W/ LAMINATED PU F.R. MEMBRANE long life VAT dyed fabric 2 way Brass zipper w/interior and exterior storm flaps and concealed snaps closure Mandarin collar w/concealed female snap configuration under collar for hood addition (Sold Seperatly) 2 torso pockets, closed with pocket flaps and concealed snap 2 mic clips at upper torso 2 lower side pockets, upper and side access w/pocket flaps, closed w/concealed snaps, pockets lined with F.R. fleece knit 2 mic clips at upper torso and Velcro patch for crest quick installation action back, elasticized waist with interior adjustment mechanism Nomex® storm knit wrists sewn with Nomex®/Aramid threads reinforced stress points CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Meets : - CGSB 155.20 Standard  Hydro Carbon Flash Fire - NFPA70E / CSA Z 462-15, Arc Flash - ASTM F 1506-08, Flame resistance - OSHA 1910.269, Flame resistance and Electrical Arc (Ontario)   ATPV 40.6 CAT4

These Premium AR/FR un-insulated bib overalls perform with functionality in mind. The most common areas of wear in most garments are wear in the seat, groin or knees regardless of the industrial setting. All of these areas have been reinforced and stitched in a way that allows for extra movement and durability. The snaps make changing in/out of these bibs quick. They're light-weight and perfect for summer yet meet every safety standard using only top quality materials. Features: • FLAT FRONT LOOK• REINFORCED KNEE PANELS, SEAT AND CROTCH• FRONT CLOSURE WITH SNAP• TWO ANGLED SIDE POCKETS WITH SIDE ACCESS PANEL WITH SNAP• RHS COIN POCKET• LHS SNAP CLOSURE CARGO POCKET AND BACK BELLOW• 2" YELLOW/SILVER/ YELLOW TRIPLE BAND REFLECTIVE DOWN THE CHEST, ACROSS THE WAIST AND LEGS, AND "X" ON BACK• 100% FR FABRIC, FR TRIMS AND THREADS Safety: CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Sewn with Nomex® /Aramid threads CGSB 155.20 ASTM F1506 ATPV 9.0 Cal/cm2 CAT 2 **For Sizing: These fit true to waist measurements. Ex: 36R Bibs are for a 36" Waist. Please consider sizing up if bibs are going over your regular clothes ***THIS ITEM IS ON CLEARANCE AND IS NOT RETURNABLE.

Made in Canada, these Premium AR/FR insulated bib overalls will keep you warm, perform with full functionality in mind and are made in Canada with only top quality material.  Features: -YKK’s Vis-lon zippers front closure-Two torso pockets with flap snap closure-YKK’s Vis-lon zipper at leg with storm flap-Tab closures at ankles with snap-Two slanted front pocket with snap closure-Two large tool pockets with division in the middle-3M Canada F.R. 2” triple trim reflective at bottom legs,-Lock stitch sewing technology,-Nomex sewing thread-Bar tacks at all stress points Safety: CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Sewn with Nomex® /Aramid threads CGSB 155.20 ASTM F1506 ATPV 40.6 Cal/cm2 CAT 4 Meets CSA Z462 Arc Flash Protection   Sizing: Please measure around the widest point of your body in inches and remember to round up to accommodate for clothing that you'll be wearing underneath! 30"-32" - XS 34"-36" - SM 38"-40" - M 42"-44" - L 46"-48" - XL 50"-52" - 2XL 54"-56" - 3XL NOTE THIS ITEM IS A CLEARANCE ITEM AND CANNOT BE RETURNED

ANSI/ISEA 105 – CUT A5 | ABRASION 4 | PUNCTURE 4CE/EN388 – 1X32EPNFPA 70E ARC FLASH – CATEGORY 4 (41 cal/cm²) Outer: Premium Grain Goatskin Liner: 360˚ A4 Para-Aramid Cut Category 4 Arc Flash Protection Gloves Pass the FR Test Under Section 8.8 Of NFPA 2112. Kevlar® Stitching Keystone Thumb Gunn Cut Slip-On Cuff. Oil and Water Resistant.

Description: ABS material. Low profile design. Rear padded suspension. 4-position harness points. Replaceable sweat band. Vented pressure pad. Universal accessory slots.  Passes high temperature. Passes low temperature. Easy to grasp knob and adjusts the suspension from 6 1/2 to 8. Swinging hinge points. Custom imprinting available.  Click here for vented Hydro Dipped options. Click here to download the instructions for inserting ratchet suspension. Realtree® AP is a registered trademark.   Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020

Description: ABS material. Low profile design. Rear padded suspension. 4-position harness points. Replaceable sweat band. Vented pressure pad. Universal accessory slots.  Passes reverse orientation. Passes high temperature. Passes low temperature. Easy to grasp knob and adjusts the suspension from 6 1/2 to 8. Swinging hinge points. Custom imprinting available.  Click here to download the instructions for inserting ratchet suspension. Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020

Description: ABS material. Low profile design. Rear padded suspension. 4-position harness points. Replaceable sweat band. Vented pressure pad. Universal accessory slots.  Passes high temperature. Passes low temperature. Easy to grasp knob and adjusts the suspension from 6 1/2 to 8. Swinging hinge points. Custom imprinting available.  Click here for Hydro Dipped options. Click here for vented full brim options. Click here to download the instructions for inserting ratchet suspension.   Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020

Description: High density polyethylene materials. Available with 4- and 6-point ratchet suspensions. Suspensions adjust from 6½ to 8 head size. Passes low temperature (LT). Meets Class E, G, and C. Hi-vis colors have been tested for the HV mark. Custom imprinting available. Click here to download the instructions for inserting ratcheting suspension. Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020

Description: Low-profile design. High density polyethylene materials. Rain trough. Universal accessory slots. Available with 4- and 6-point nylon suspensions – snap lock and ratchet styles. Suspensions adjust from 6½ to 8 head size. Passes for reverse orientation and low temperature (LT). Meets Class E, G, and C. Hi-vis colors have been tested for the HV mark. Custom imprinting available. Click here to download the instructions for inserting suspension. Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020

Description: ABS material. Low profile design. Rear padded suspension. 4-position harness points. Replaceable sweat band. Vented pressure pad. Universal accessory slots.  Passes high temperature. Passes low temperature. Easy to grasp knob and adjusts the suspension from 6 1/2 to 8. Swinging hinge points. Custom imprinting available.  Click here for vented Hydro Dipped options. Click here to download the instructions for inserting ratchet suspension. Realtree® AP is a registered trademark.   Standards and Certifications: ANSI/ISEA Z89.1-2014 (R2019 - Hard Hats)CAN/CSA Z94.1-2020