Trending Products

Building on the iconic styling of the Women’s Bralorne lineup, the new Wellington steps onto the job. The waterproof leather and suede upper give it a rugged, lived-in appeal that resists abrasions while the waterproof/breathable membrane keeps the elements out. The exclusive smart-seam design features built-in flex-points that allow for quicker break-in and superior agility in the field. Under foot, the Comfortzone™ footbed with Ortholite® comfort foam absorbs shock and provides heel-to-toe support. For superior traction, the rubber outsole is formulated to be oil-resistant, slip-resistant and non-marking. Kodiak® pull-on Wellington style boot Full grain waterproof leather and suede with waterproof membrane construction Smart Seam™; designed and engineered to help eliminate ankle hot spots Dual waterproof leather pull-tabs KODIAK® SOS Smell Out Science® odour control technology Abrasion-resistant lining wicks away moisture ROCKFIBRE® METAL FREE technology Comfortzone™ footbed with Ortholite® comfort foam Oil and slip-resistant, non-marking rubber outsole CSA approved composite safety toe, composite plate, ESR Weight: 724 grams / 1.6 lbs per size 7 boot Style available: Wheat (8354WT)

UL Certified to NFPA 2112Dual Hazard FR/AR ProtectionPre-shrunk 8oz 88% Cotton & 12% nylonArc Flash Rated, ATPV: 12 cal, CAT 2Meets CSA Z96-22 High Visibility Standard: - Class 1 Level 2 / Class 1 Level FR: Royal Blue & Black This garment meets the requirements of NFPA 2112, NFPA 70E, ASTM F1506, CAN/CGSB 155.20, CAN/CGSB 155.22,OSHA 29 CFR 1910.269, EN ISO 11611, EN 150 11612, EN ISO 14116. Atlas Ultravis® high quality 4" industrial washable reflective stripesLife Time Flame Resistant QualityComfortable and BreathableHeavy Duty two-way Aramid zippers8 Pockets, 3 Mic Loops Carrying all sizes in stock from 32-80 R & T

UL Certified to NFPA 2112 Dual Hazard FR/AR Protection Last picture has 4" stripes, all other descriptions are accurate Pre-shrunk 8oz 88% Cotton & 12% nylon Arc Flash Rated, ATPV: 12 cal, CAT 2 Meets CSA Z96-22 High Visibility Standard: - Class 2 Level 2: Orange This garment meets the requirements of NFPA 2112, NFPA 70E, ASTM F1506, CAN/CGSB 155.20, CAN/CGSB 155.22,OSHA 29 CFR 1910.269, EN ISO 11611, EN 150 11612, EN ISO 14116. Atlas Ultravis® high quality 2" industrial washable reflective stripes Life Time Flame Resistant Quality Heavy Duty two-way Aramid zippers 8 Pockets, 2 Mic Loops Carrying all sizes in stock from XS-7XL R & T

Atlas Guardian® FR/AR Gray Insulated Parka 2191GR *Please refer to the size guide for proper sizing.The Atlas Guardian AR/FR insulated parka is one of the mose advanced parkas on the market. Integrating D-Ring access is a feature that has never been an option on other high-end parkas. UL Certified to NFPA 2112 Dual Hazard FR/AR Protection Shell: 88% Cotton 12% Nylon Insulation: 14oz. FR Modacrylic Lining Arc Flash Rated, ATPV: 41 cal, CAT 4 Meets CSA Z96-22 High Visibility Standard: - Class 1 Level FR: Royal Blue, Red, Grey, Black, Green & Navy - Class 2 Level 2: Orange All Parkas will come with a D-Ring opening starting winter 2023 This garment meets the following requirements NFPA 2112 NFPA 70E ASTM F1506 CAN/CGSB 155.20 CAN/CGSB 155.22 OSHA 29 CFR 1910.269 EN ISO 11611 EN 150 11612 EN ISO 14116 Atlas Ultra-Vis Reflective Stripes – industrial washable Life Time Flame Resistant Quality FR Fleece Lined Pockets Shoulder Straps Suitable for H2S Monitors Carrying all sizes in stock from XS-7XL *Parkas with D-Rings will be available as older inventory gets filtered out, if you require D-Rings on your parkas please inform us and we will do our best to accommodate your request

Royer 8410FLX 6" Metal Free Water proof Work Boot - WHEAT 6 inch metal-free boot Waterproof AIRFLOW membrane Crazy-horse leather Composite protective toecap Ultra-resistant TPU PARESHOK bumper toe Non-metallic puncture-resistant insole Light and flexible FLX rubber sole Direct-attach PU midsole Low density PU footbed for added comfort SILVERCLEAR treated TAIBRELLE lining Protection against electrical hazards CSA Z195-14 certified protective toecap and certified puncture-resistant sole CSA Z195-14 certified electric-shock protection (18 kV / 60 Hz / 1 minute) ASTM F2413-11 certified protective toecap (impact resistance of 75 ft-lbf) ASTM F2413-11 certified protective toecap (compression resistance of 2500 lbs) ASTM F2413-11 certified puncture-resistant sole (1 200 newtons) ASTM F2413-11 certified electric hazard protection (18 kV / 60 Hz / 1 minute)

*NOTE: it is advised you order one size smaller then required. This parka is oversized if you normally wear a large, order a medium in this product or please consult the size guide RWW Premium FR Grey Insulated Parkas w/ 2" CSA Striping NFPA 2112, NFPA 70E, ASTM 1506 9 oz. – 88% Cotton & 12% nylon,  Certified flame-resistant by UL. 12 oz. – Flame Resistant Modacrylic insulation. 7 oz. – Flame Resistant 100% Cotton. Flame Resistant fleece lined hand pockets - Dual Entry. Garment designed and engineered for lifetime flame resistant quality. PPE HRC 4 (CAT 4). 3M Scotchlite Reflective Stripes – industrial wash. Shoulder straps suitable for H2S monitors. Available in sizes from XS to 6XL.

RASCO HiVis Bomber Jacket Orange with 4" Reflective Striping FR6906OH 8.5 oz Westex All Out®  88% Cotton / 12% High Tenacity Nylon with Wind & Water Resistance Insulation: 7oz. FR Modacrylic Lining: 7.5oz. FR Flameshield 100% Cotton Twill Arc rating (APTV): 40 cal/cm2 CAT 4 (HRC 4) Two way concealed FR taped zipper Two chest pockets with flaps Elastic waistband Two hammer warmer side pockets 4" yellow/silver/yellow FR industrial wash reflective trim   Certifications: CSA Z96-15  NFPA 2112 - Certified by UL  CSA Z462  CGSB 155.20  NFPA 70E

Offering superior breathability and outstanding moisture management while still meeting CAT 2 with an ATPV of 8.2 cal/cm², this durable coverall offers guaranteed flame resistance for the life of the garment. The high quality construction, enhanced visibility protection, premium fabric and deluxe features all designed to keep you comfortable and safe. 7 oz – 88% cotton, 12% high tenacity nylon from Bizflame® Lightweight and comfortable Guaranteed flame resistance for life of garment Centre front two-way brass zip Strap and elastic fasteners for attaching H2S monitor Lowered reflective tape on back to allow for logo application Dual hazard protection Sew on flame resistant 2″ reflective tape 8 pockets for ample storage ARC2 40+ UPF rated fabric to block 98% of UV rays

Serious protection for long days on the job comes standard in our fresh take on the classic work boot. Composite safety-toe construction combines with the composite safety plate to provide essential protection on the jobsite. With seam-sealed waterproof construction and superior traction on everything from slick concrete to loose gravel, they’ll keep you dry and safe in every season. Classic KODIAK® 6" boot design with bellows leather tongue and padded collar with integrated pull tab Full grain waterproof leather with waterproof membrane construction KODIAK® SOS Smell Out Science® odour control technology Abrasion-resistant lining wicks away moisture Comfortzone™ footbed with OrthoLite® comfort foam Oil and slip-resistant, non-marking rubber outsole CSA approved composite toe, composite plate, ESR 2 sets of laces Weight: 980 grams / 2.16 lbs per size 9 boot Style available: Brown (K4TFBN)

The Narvik pull-on safety work boot is versatile with a comfort rating of -30°C/-22°F. Keeping you safe in heavy duty work environments, the Narvik is constructed with XRD® internal metatarsal protection. Additionally, this boot is equipped with a direct-injected, industrial grade, thermal PU upper and a heavy-duty all terrain-rubber outsole that is heat, slip, oil and acid-resistant. The moisture-wicking neo-spacer lining and premium single-density PU FOOTBED® insole deliver added comfort for your feet. Direct-injected, industrial grade, thermal PU upper Moisture-wicking neo-spacer lining XRD® internal metatarsal protection Lightweight injected PU midsole Heavy-duty all-terrain rubber outsole – heat, slip, oil and acid-resistant Premium single-density PU FOOTBED® insole CSA approved composite safety toe, composite plate, ESR, met guard TERRA FIRMA-FLEX® – 100% Metal Free Comfort rated to -30°C/-22°F Weight: 1360 grams / 3 lbs per size 9 boot Style available: Black (R3001B)

9.6oz 43% LYOCELL, 39% MODACRYLIC,14% PARA-ARAMID, 4% SPANDEX.USA FABRICArc rating (APTV): 22 cal/cm2 CAT 2 (HRC 2) Front handwarmer kangaroo pocketRib knit cuffs & waistbandHighly Breathable, Versatile Warmth PerformanceMoisture Wicking FabricCertifications:ASTM F1506NFPA 2112 - Certified by ULCSA Z462 CGSB 155.20NFPA 70E