Trending Products

MEN'S FORGE FR BLACK HENLEY Tough and Long Days at work are going to comfortable with This FORGE Fire Resistant Henley. If your Job needs high quality apparels with comfortable motions than your search ends here with our FR Henley.This Fire Resistant Henley is made from 100% Cotton for a lightweight and easy feel at work, Crafted with a chest pocket to address all necessities close by and secure.Greater Arm Mobility seams provides full range of motion so you never tired from the work place. FEATURES : 100% Cotton 6.5 Oz Inherently Aramid sewing thread Lightweight maximum comfortable fabric Ribbed collar and cuff to maintain shape Comfortable self fabric STANDARDS : UL certified NFPA 2112 – 2018 NFPA 70E PPE ASTM F1506 ARC RATING : ATPV 11 cal/cm2, HRC/CAT 2

*NOTE: it is advised you order one size smaller then required. This parka is oversized if you normally wear a large, order a medium in this product or please consult the size guide RWW Premium FR Navy Blue Insulated Parkas w/ 2" CSA Striping NFPA 2112, NFPA 70E, ASTM 1506 9 oz. – 88% Cotton & 12% nylon,  Certified flame-resistant by UL. 12 oz. – Flame Resistant Modacrylic insulation. 7 oz. – Flame Resistant 100% Cotton. Flame Resistant fleece lined hand pockets - Dual Entry. Garment designed and engineered for lifetime flame resistant quality. PPE HRC 4 (CAT 4). 3M Scotchlite Reflective Stripes – industrial wash. Shoulder straps suitable for H2S monitors. Available in sizes from XS to 6XL.

Designed for workers who may be exposed to potential flash fire and arc flash hazards typically associated with Oil & Gas, Utility, Construction and Industrial applications. Layer under protective outerwear to increase protection. Tested for both NFPA 2112 and NFPA 70E compliance. Maintains protection through 100 home washings (50 commercial laundry cycles). 7 ounce flame-resistant cotton jersey knit ASTM F1506; NFPA 2112 certified; UL classified NFPA 70E compliant; ATPV 12 cal/cm2 (PPE Cat 2) Stitched with FR aramid threads throughout Convenient pen pocket on left sleeve Tested to retain protection through 100 washes Sizes: S-4XL

Made in Canada, these Premium AR/FR insulated bib overalls will keep you warm, perform with full functionality in mind and are made in Canada with only top quality material.  Features: -YKK’s Vis-lon zippers front closure-Two torso pockets with flap snap closure-YKK’s Vis-lon zipper at leg with storm flap-Tab closures at ankles with snap-Two slanted front pocket with snap closure-Two large tool pockets with division in the middle-3M Canada F.R. 2” triple trim reflective at bottom legs,-Lock stitch sewing technology,-Nomex sewing thread-Bar tacks at all stress points Safety: CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Sewn with Nomex® /Aramid threads CGSB 155.20 ASTM F1506 ATPV 40.6 Cal/cm2 CAT 4 Meets CSA Z462 Arc Flash Protection   Sizing: Please measure around the widest point of your body in inches and remember to round up to accommodate for clothing that you'll be wearing underneath! 30"-32" - XS 34"-36" - SM 38"-40" - M 42"-44" - L 46"-48" - XL 50"-52" - 2XL 54"-56" - 3XL NOTE THIS ITEM IS A CLEARANCE ITEM AND CANNOT BE RETURNED

Made in Canada   Comfortable opening fit with reinforced fabric Extra long for better protection Strong stitching Care: Industrial wash   Safety Standards Arc Rating ATPV 32.2 calories/cm²,ASTM 1506,ASTM 1891,ASTM 2733,CSA Z462,NFPA 70ECategory CATEGORY 3Flame Resistant: YesFeatures MidweightMaterial 50% Kermel/50% Lenzing FR,7.5 oz,Polartec® Power dry FR

88% COTTON 12% HIGH TENACITY NYLON 7OZ SHELL W/LAMINATED AND WATER/WIND RESISTANT PU MEMBRANE long life VAT dyed fabric 2 way Vislon® zipper w/interior and exterior stormflaps w/concealed snaps closure mandarin collar w/concealed female snap configuration under collar for hood addition (hood in option) 2 torso pockets, pencil slot in left pocket, with pocket flaps and concealed snap closure 2 mic clips at upper torso 2 lower side pockets, upper and side access w/pocket flaps, concealed snap closures, lined with F.R. fleece action back, elasticized waist Concealed adjustable snap closure at wrists interior brass zipper compatible to insertion of quilted liner  sewn with Nomex® /Aramid threads reinforced stress points CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2''   Meets - CGSB 155.20 Standard  Hydro Carbon Flash Fire - NFPA70E / CSA Z 462-15, Arc Flash - ASTM F 1506-08, Flame resistance - OSHA 1910.269, Flame resistance and Electrical Arc (Ontario) ATPV 21.1 CAT 2 ( without the liner ) Options : -Flame resistant detachable hood (VE1280F0) INCLUDED IF AVAILABLE  ATPV 59.4 CAT 4 with detachable liner ***THIS ITEM IS A CLEARANCE ITEM AND CANNOT BE RETURNED OR EXCHANGED

Atlas Guardian® FR/AR Navy Insulated Parka 2191NB *Please refer to the size guide for proper sizing.The Atlas Guardian AR/FR insulated parka is one of the most advanced parkas on the market. Integrating D-Ring access is a feature that has never been an option on other high-end parkas. UL Certified to NFPA 2112 Dual Hazard FR/AR Protection Shell: 88% Cotton 12% Nylon Insulation: 14oz. FR Modacrylic Lining Arc Flash Rated, ATPV: 41 cal, CAT 4 Meets CSA Z96-22 High Visibility Standard: - Class 1 Level FR: Royal Blue, Red, Grey, Black, Green & Navy - Class 2 Level 2: Orange All Parkas will come with a D-Ring opening starting winter 2023 This garment meets the following requirements NFPA 2112 NFPA 70E ASTM F1506 CAN/CGSB 155.20 CAN/CGSB 155.22 OSHA 29 CFR 1910.269 EN ISO 11611 EN 150 11612 EN ISO 14116 Atlas Ultra-Vis Reflective Stripes – industrial washable Life Time Flame Resistant Quality FR Fleece Lined Pockets Shoulder Straps Suitable for H2S Monitors Carrying all sizes in stock from XS-7XL *Parkas with D-Rings will be available as older inventory gets filtered out, if you require D-Rings on your parkas please inform us and we will do our best to accommodate your request

ATPV = 18 CAL, CAT 2CSA Z96-22 Class 1 Level 2 / Class 1 Level FROHSA 213/91 Sec 69.1 (4)UL Certified to NFPA 2112Dual Hazard FR/AR ProtectionPre-shrunk 11oz. 100% CottonAtlas Ultravis® 4″ Segmented StripingGuaranteed Flame Resistance for Life of GarmentFR Aramid ZipperDetachable Hood Carrying all sizes in stock from XS-7XL

Refinery Work Wear is excited to offer these premium Navy Stretch Comfort Hi-Vis Cargos. Every consideration has been put behind the design of these pants in terms of comfort, safety, movement, and function. These cargos are much softer and flexible than most standard style cargos. They also offer reinforcement in common-wear areas, hidden elastic waist, and a zippered pocket.  THIS IS A CLEARANCE ITEM **The elastic in the waist band tend to make the pants run a bit tight and therefore we recommend going ONE size up. Features: Color: Classic Dark Navy Flat front design Reinforced knee panel Comfort elastic expandable waist Two angled side pockets Coin pocket Shaped front hem Back pockets 6 standard belt loops and 1 wide back belt loop Reinforced groin and seat Hi-Vis striping below the knee ONE size up from normal waist size is recommended** Safety: 3M Scotchlite 2" reflective Hi-Vis Striping below knee HRC2/CAT 2 ATPV 9.0 cal/cm2 (electric arc flash rating) ASTM F1506 / NFPA 70E CGSB 155.20 / NFPA 2112  

88% COTTON 12% HIGH TENACITY NYLON FLAME RESISTANT INSULATED PARKA W/ LAMINATED PU F.R. MEMBRANE long life VAT dyed fabric 2 way Brass zipper w/interior and exterior storm flaps and concealed snaps closure Mandarin collar w/concealed female snap configuration under collar for hood addition (option) Hood included if available. 2 torso pockets, closed with pocket flaps and concealed snap 2 mic clips at upper torso 2 lower side pockets, upper and side access w/pocket flaps, closed w/concealed snaps, pockets lined with F.R. fleece knit 2 mic clips at upper torso and Velcro patch for crest quick installation action back, elasticized waist with interior adjustment mechanism Nomex® storm knit wrists sewn with Nomex®/Aramid threads reinforced stress points CSA Z96-15 Hi Visibility compliant, 3M® Triple trim 2'' Meets : - CGSB 155.20 Standard  Hydro Carbon Flash Fire - NFPA70E / CSA Z 462-15, Arc Flash - ASTM F 1506-08, Flame resistance - OSHA 1910.269, Flame resistance and Electrical Arc (Ontario)   ATPV 40.6 CAT4

Black Stallion's FR balaclava is a single layer AR/FR rated Cotton balaclava. made from a very comfortable 6.5 oz cotton with a ergonomic contoured fit and longer neck protection. NFPA 70E compliant (ATPV 10 cal/cm2 -- ARC 2)

• SET-IN SLEEVE SHIRT• CENTER FRONT BUTTON UP CLOSURE• TWO LARGE CHEST POCKETS• PEN SLIT ON LEFT CHEST POCKET• TWO PIECE STAND COLLAR• ELBOW PATCHES DOUBLE LAYER• BUTTON-UP CUFF WITH SLEEVE PLACKET• ACTION BACK• -Triple Trim 3M Canada 2” F.R. as per CSA Z96• RADIO LOOPS THIS FR WORKWEAR GARMENT MEETS THEREQUIREMENTS OF CAN/CGSB-155.20.MEETS REQUIREMENTSOF PERFORMANCESPECIFICATION ASTM-F1506. We recommend sizing up by one size as this manufacturer runs smaller than usual.  **THIS IS A CLEARANCE ITEM AND MAY HAVE RESTRICTIONS FOR RETURNS. Please see our Shipping and Returns page for more information.

LAPCO FR™ flame-resistant cargo pants with an exclusive moisture management finish keep you cool, dry, and safe. Got plenty to carry around with you at work? Then these are the pants for you. Many hands-FR e carrying options included with this new style. Enjoy the durability of pants made to withstand hard work in addition to a neat, professional look. Mid-rise pants with straight leg openings. Relaxed fit through seat and thighs. Non-conductive button and snap closures. Reinforced back flap pockets with snap closures. Left and right cargo pockets at the thighs. Jeans-style front pockets. Sewn with Nomex® thread. Brass zipper with Nomex® tape. 9oz. 100% Flame-Resistant Cotton Twill with a Moisture Management Finish ATPV 13.2 cal/cm²,HRC/CAT 2,NFPA 70E,UL Classified ASTM F1506,UL Classified NFPA 2112