forcefield

Need a flame-resistant garment that will keep you warm and visible? Look no further. Encompassing all FR standards this hoodie will ensure you are safe, comfortable and compliant. Meets CGSB 155.20, 2000 HRC2 Arc rating:atpv =20.9 cal/cm2 ASTM F1506 and NFPA 70E Material meets the requirements of NFPA2112-2012 ULcertified 100 % cotton 12 oz. fr treated fabric Aramid high tenacity FR thread Bar-tacked at all stress points Adjustable drawstring around hood One-way #5 resin zipper on aramid tape FR rib knit cuff & waistband Removable snap hood FR silver retroreflective tape

Introducing our Fire Resistant (FR) 5-Point Tear-away Hi Vis Safety Vest. Crafted from FR treated 100% polyester mesh, it features retroreflective tape for enhanced visibility. With 5-point tear-away design, adjustable sizing, and extra-strong edging, it ensures both safety and comfort. FR treated 100% polyester mesh Meets EN ISO 14116 Index 1 Meets CSA Z96-15 Class 2 Level 2 This garment should be worn over an FR long-sleeved garment Retroreflective tape in 4" contrast fluorescent configuration 5 point tear-away Extra-strong edging tape D-ring access slot 3 inches of adjustable size in the front This garment is constructed from flame-resistant fabrics and components, resists ignition, and will not continue to burn when removed from the ignition source. Designed for continuous wear. Please read care instructions carefully before using any FR garment.

Introducing our Fire Resistant (FR) 5-Point Tear-away Hi Vis Safety Vest. Crafted from FR treated 100% polyester mesh, it features retroreflective tape for enhanced visibility. With 5-point tear-away design, adjustable sizing, and extra-strong edging, it ensures both safety and comfort. FR treated 100% polyester mesh Meets EN ISO 14116 Index 1 Meets CSA Z96-15 Class 2 Level 2 This garment should be worn over an FR long-sleeved garment Retroreflective tape in 4" contrast fluorescent configuration 5 point tear-away Extra-strong edging tape D-ring access slot 3 inches of adjustable size in the front This garment is constructed from flame-resistant fabrics and components, resists ignition, and will not continue to burn when removed from the ignition source. Designed for continuous wear. Please read care instructions carefully before using any FR garment.

Stand out after nightfall and shield yourself against fire. Like bullet-proof clothing for law enforcement, our flame-resistant safety vest defends against ignition and supplies you with the technology needed to perform your job more safely. Keep your essentials close by with integrated pockets and pen slots that give you the ability to stay prepared for any scenario. 100% FR treated preshrunk 10 oz.(350 gsm) cotton duck Meets: HRC 2- APTV 12 Cal/cm CSA Z96-15 Class 1 Level FR CAN/CGSB-155.20-2000 NFPA2112 TPP(with spacer) 10.4 Cal/cm Average TPP(contact test) 8.3 Cal/cm Average This garment should be worn over an FR long-sleeved garment Retroreflective tape in 4" contrast fluorescent configuration Double snap-adjustable front closure 2 inner, 2 outer, 1 cell phone, and multiple pen slots pockets D-ring access slot Double radio clip tabs This garment is constructed from flame-resistant fabrics and components, resists ignition, and will not continue to burn when removed from the ignition source. Designed for continuous wear. Please read care instructions carefully before using any FR garment.

This FR Treated 100% Cotton Coverall features reflective tape for visibility, made from pre-shrunk 9 oz. cotton twill and polyester FR thread. It includes a heavy-duty FR brass zipper, 2" FR retroreflective tape, double-needle stitching, and bar-tacked stress points. Designed for safety and mobility, it has a protective collar, storm guard, action back, elasticized waist, adjustable wrists and ankles, multiple pockets, and all metal parts are thermally protected from the skin. Hazard/Risk Category (HRC) 2 Arc Thermal Protective Value (ATPV) 9.5 cal/cm2 CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire) Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2 ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards) NFPA 70E (Standard for electrical safety in workplace) 100% 9 oz. Pre-shrunk Cotton, FR treated, twill weave 100% Polyester FR thread Heavy duty # 5 FR brass zipper on aramid tape 2" FR retroreflective tape in CSA configuration Double-needle stitching on reflective tape Bar-tacked at all stress points All metal thermally protected from the skin Protective shirt collar Storm guard over front zipper with snap closure Action back for mobility and elasticized waist sides Adjustable wrists and ankles 1 flap chest patch pocket on right, with YKK snap closure 2 waist patch pockets with side access 2 rear hip patch pockets Tool pocket on right leg

Elevate your safety standards with our Orange FR Treated 100% Cotton Coverall, featuring reflective tape for enhanced visibility. Meeting Hazard/Risk Category (HRC) 2 and boasting an Arc Thermal Protective Value (ATPV) of 9.5 cal/cm², this coverall adheres to CAN/CGSB 155.20-2000, ASTM F1506, and NFPA 70E standards, ensuring protection against flash fire and electrical arc hazards. Crafted from pre-shrunk, FR-treated 9 oz. cotton with a twill weave and 100% polyester FR thread, it includes a heavy-duty FR brass zipper, 4" FR retroreflective tape, and is designed with an action back for mobility, adjustable wrists and ankles, and multiple pockets for functionality. All metal is thermally protected from the skin, ensuring your safety in all working conditions. Hazard/Risk Category (HRC) 2 Arc Thermal Protective Value (ATPV) 9.5 cal/cm2 CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire) TPP with spacer average 12.4 cal/cm2 TPP without spacer average 10.7cal/cm2 ASTM F1506 (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards) NFPA 70E (Standard for electrical safety in the workplace) 100% 9 oz. Pre-shrunk Cotton, FR treated, twill weave 100% Polyester FR thread Heavy duty # 5 FR brass zipper on aramid tape 4" FR retroreflective tape in CSA configuration Double-needle stitching on reflective tape Bar-tacked at all stress points All metal thermally protected from the skin Protective shirt collar Storm guard over front zipper with snap closure Action back for mobility and elasticized waist sides Adjustable wrists and ankles 1 flap chest patch pocket on the right, with YKK snap closure 2 waist patch pockets with side access 2 rear hip patch pockets Tool pocket on the right leg

This FR Treated 100% Cotton Coverall features reflective tape for visibility, made from pre-shrunk 9 oz. cotton twill and polyester FR thread. It includes a heavy-duty FR brass zipper, 2" FR retroreflective tape, double-needle stitching, and bar-tacked stress points. Designed for safety and mobility, it has a protective collar, storm guard, action back, elasticized waist, adjustable wrists and ankles, multiple pockets, and all metal parts are thermally protected from the skin. Hazard/Risk Category (HRC) 2 Arc Thermal Protective Value (ATPV) 9.5 cal/cm2 CAN/CGSB 155.20-2000 (Canadian FR standard, workwear protection against flash fire) Thermal Protective Performance (TPP) value: with spacer 11, contact test 8.2 ASTM F1506-10a (Performance spec for textiles used in clothing exposed to electrical arc and thermal hazards) NFPA 70E (Standard for electrical safety in workplace) 100% 9 oz. Pre-shrunk Cotton, FR treated, twill weave 100% Polyester FR thread Heavy duty # 5 FR brass zipper on aramid tape 2" FR retroreflective tape in CSA configuration Double-needle stitching on reflective tape Bar-tacked at all stress points All metal thermally protected from the skin Protective shirt collar Storm guard over front zipper with snap closure Action back for mobility and elasticized waist sides Adjustable wrists and ankles 1 flap chest patch pocket on right, with YKK snap closure 2 waist patch pockets with side access 2 rear hip patch pockets Tool pocket on right leg

Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire-resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 0.50mm Fluorescent PU Flame-resistant material with 8000mm water-resistance 4” Heat transfer reflective tape with contrast fluorescent configuration Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M CSA Z96-15 Class 2 Level 2 Class 2 Level FR

Probably the most functional garment you can find. This water-resistant (up to 8000mm) and windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire-resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 0.50mm Fluorescent PU Flame-resistant material with 8000mm water-resistance 4” Heat transfer reflective tape with contrast fluorescent configuration Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M CSA Z96-15 Class 2 Level 2 Class 2 Level FR

Probably the most functional garment you can find. This water-resistant (up to 8000mm)and a windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance 2" Heat transfer reflective stripes on front and back Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M Class 2 Level FR

Introducing our Lightweight Fire Resistant (FR) Hi Vis Safety Rain Overalls. Crafted with 50mm Fluorescent PU Flame-resistant material, ensuring 8000mm Water Resistance. Features include 2" Heat transfer reflective stripes, waterproof construction with welded seams, and compliance with CAN/CGSB 155.20 - 2000 Type 3, ASTM D6413/D6413M, and CSA Z96-15 Class 3 Level 2 standards when paired with the rain jacket. 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance 2” Heat transfer reflective stripes 360 ̊ leg band around ankle Waterproof, heat sealed with welded seams Bib pants with adjustable elastic suspenders Bib pants with adjustable elastic suspenders Quick-release Delrin clip Knee Patch Adjustable ankle gusset with extended pants cuff CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M Item meets CSA Z96-22 Class 3 Level 2 when worn with a CSA Z96-22 Class 2 Level 2 upper garment that includes reflective armbands

Stay safe and visible in any weather with our Fire Resistant Hi-Vis Safety Rain Jacket. Waterproof and durable with welded seams, it features a detachable hood with visor, vented underarms, secure storm cuffs, and practical front snap pockets. 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance  2” Heat transfer reflective stripes on the front and back Waterproof, heat sealed with welded seams Vented underarms, elastic storm cuffs Detachable fold-away hood with visor Adjustable drawstring on hood  Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M  CSA Z96-22 Class 2 Level 2 Class 2 Level FR 

Probably the most functional garment you can find. This water-resistant (up to 8000mm)and a windproof hi-vis safety rain jacket is made of a lightweight polyurethane shell. This allows the user to stay warm and dry while feeling like they are wearing as little as a summer nylon anorak. Did we mention it is fire resistant, in accordance with the CGSB Type 3 standard. Whether you are working on steamship lines or construction sites, this is the best choice for a waterproof rain jacket that meets CGSB fire resistance and CSA hi-vis standards. 50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance 2" Heat transfer reflective stripes on front and back Waterproof, heat-sealed with welded seams Vented underarms, elastic storm cuffs Fold-away hood with visor Adjustable drawstring on hood Front zipper closure and storm flap 2 Front snap pockets Inner cell phone pocket CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M Class 2 Level FR

Introducing our Lightweight Fire Resistant (FR) Hi Vis Safety Rain Overalls. Crafted with 50mm Fluorescent PU Flame-resistant material, ensuring 8000mm Water Resistance. Features include 2" Heat transfer reflective stripes, waterproof construction with welded seams, and compliance with CAN/CGSB 155.20 - 2000 Type 3, ASTM D6413/D6413M, and CSA Z96-15 Class 3 Level 2 standards when paired with the rain jacket. 0.50mm Fluorescent PU Flame-resistant material with 8000mm Water Resistance 2” Heat transfer reflective stripes 360 ̊ leg band around ankle Waterproof, heat sealed with welded seams Bib pants with adjustable elastic suspenders Bib pants with adjustable elastic suspenders Quick-release Delrin clip Knee Patch Adjustable ankle gusset with extended pants cuff CAN/CGSB 155.20 - 2000 Type 3 ASTM D6413 / D6413M Item meets CSA Z96-22 Class 3 Level 2 when worn with a CSA Z96-22 Class 2 Level 2 upper garment that includes reflective armbands